Functions and advantages

1.Low evaporation at high temperature.

2.Excellent oxidation resistance and rarely produces oily sludge when the film is formed.

3.Low friction coefficient and excellent lubrication at high temperature.

4.Excellent rust resistance and defoaming property.

5.Less influence on sealing ring material and coating.

TYPICAL CHARACTERISTICS

Note: The above data are based on laboratory samples and are typical parameters. The actual product parameters fluctuate slightly with the batch.

MANTO MAX Grease Alpha F is a kind of high temperature and long life white fluorine oil, which is based on synthetic oil with high chemical stability and thermal stability, and polytetrafluoroethylene as thickener by special process. This grease will not oxidize, harden or soften leakage at high temperature and can prevent corrosion in wet environment. It is designed for the lubrication of bearings, gears, guide rails and sliding mechanical devices which are unable to withstand long-term high temperature operation or heavy load of general grease.

Operating Temperature：

-50℃～+275℃

Performance and Characteristics：

1、Excellent moisture-proof, waterproof, dustproof, shock absorption, shock absorption, blocking, buffering, lubrication, noise reduction, sealing and damping performance;

2、Excellent high and low temperature oxidation resistance, hardening or softening properties, with high chemical inertia, long life lubrication;

3、Excellent anti-wear lubricity and bearing capacity, extremely low coefficient of friction and evaporation loss;

4、Good corrosion protection for metal materials, compatible with most plastics and elastic-colloid;

5、Excellent resistance to water, steam, mild acid or alkaline liquid washing, long service life;

6、Excellent thermal stability: no chemical decomposition, fracture characteristics; It is volatile and has no carbon deposits or deposits;

7、Excellent adhesion performance: high compression rate of oil molecules, outstanding adhesion performance, obvious wire drawing performance (for metal materials and synthetic polymer materials have high adhesion), excellent electrical insulation and shear stability, long reciprocating actuation service life;

8、Environmental protection, non-toxic, tasteless, selection of perfluorinated polyether base oil, the use of a wide range of temperature.

Physical and Chemical Data：

Storage ：

1、Store in a cool, ventilated and dry place with room temperature below 45℃, not upside down.

2、Not close to acid, alkali, oxidant and other corrosive substances, not exposed to the sun.

Manto Hydrax SHV series are high performance hydraulic fluids designed for extremely low temperature operations, particular in cold areas. It ensures start-up under as low as -45℃ and it is evironmental friendly. It is typically used in solar tracking systems of parabolic trough technology in CSP. 

A high performance compressor fluid with fully synthetic base oil and special anti-oxidation addictive and anti-rust agent. It provides a prolonged and nearly doubled service life over those normal mineral oil based compressor fluids.

Manto MaxGear Alpha A Series are produced by a synthetic base oil and compound addictive systems, which help prevent the friction surface from corrosion. In this way, it helps improve the surface smoothness and reduce additional generation of heat and energy loss of the gear box. It is typically used in a wind turbine gear box.

Manto Hydrax HLP Series hydraulic fluids are designed to give maximum protection to hydraulic pumps in high-performance industrial applications as well as in environmentally sensitive areas. They are formulated with high quality base stocks and an ashless (“Zinc-free”) additive system that provides superior oxidation stability, water separability, foam suppression, and protection against wear, rust and corrosion.