MANTO MAX Grease Alpha F is a kind of high temperature and long life white fluorine oil, which is based on synthetic oil with high chemical stability and thermal stability, and polytetrafluoroethylene as thickener by special process. This grease will not oxidize, harden or soften leakage at high temperature and can prevent corrosion in wet environment. It is designed for the lubrication of bearings, gears, guide rails and sliding mechanical devices which are unable to withstand long-term high temperature operation or heavy load of general grease.
Operating Temperature：
-50℃～+275℃
Performance and Characteristics：
1、Excellent moisture-proof, waterproof, dustproof, shock absorption, shock absorption, blocking, buffering, lubrication, noise reduction, sealing and damping performance;
2、Excellent high and low temperature oxidation resistance, hardening or softening properties, with high chemical inertia, long life lubrication;
3、Excellent anti-wear lubricity and bearing capacity, extremely low coefficient of friction and evaporation loss;
4、Good corrosion protection for metal materials, compatible with most plastics and elastic-colloid;
5、Excellent resistance to water, steam, mild acid or alkaline liquid washing, long service life;
6、Excellent thermal stability: no chemical decomposition, fracture characteristics; It is volatile and has no carbon deposits or deposits;
7、Excellent adhesion performance: high compression rate of oil molecules, outstanding adhesion performance, obvious wire drawing performance (for metal materials and synthetic polymer materials have high adhesion), excellent electrical insulation and shear stability, long reciprocating actuation service life;
8、Environmental protection, non-toxic, tasteless, selection of perfluorinated polyether base oil, the use of a wide range of temperature.
Physical and Chemical Data：
|
|
Character |
TYPICAL CHARACTERISTICS |
|
1 |
Appearance |
White grease |
|
2 |
Thickener |
Polytetrafluoroethylene |
|
3 |
Base Oil |
Perfluorinated polyether |
|
|
Viscosity（mm2/s），DIN 51562 40℃ |
451 |
|
4 |
Density（g/cm3），20℃ |
1.89 |
|
5 |
100,000 Shear Test Cone Penetration |
Less Than 30 |
|
6 |
Four Ball Test（VKA），DIN 51350 |
8000N/8500N |
|
7 |
Copper Corrosion(100℃24h) |
1a |
|
8 |
Level of Consistency(DIN 51818) |
2 |
|
9 |
Oxidation Stability(100℃ 24h) |
0.5 |
|
10 |
Operating Temperature(℃) |
-50℃～275℃ |
Storage ：
1、Store in a cool, ventilated and dry place with room temperature below 45℃, not upside down.
2、Not close to acid, alkali, oxidant and other corrosive substances, not exposed to the sun.